Product Detail

Trotter Weather Vane by Clare-Bell® Brass Works

Which way is the wind blowing...
Made in the USA

Pin It
Item #: 1911
Our Price: $31.99
3 units available

Extremely well made of gold plated solid brass that will not tarnish. The sections of this beautifully detailed piece will rotate smoothly, requiring only simple assembly.

2"W x 3"H

Installation instructions:
Mark where you want your weathervane to be and drill a 1/8" (3.2mm) dia. x 7/8" (22.2mm) deep hole as straight down (vertical) as possible. Use a small amount of glue in the hole that you just drilled and push the weather vane shaft into it until it hits the shoulder on the shaft. Use a small amount of glue to secure the directional to the shaft. Make sure you aim the compass points where you want them. Let the glue dry before going any further. Hold the ball and the figure together and slide the post into the hole in the shaft. The top figure will spin freely.

Scale: 1/12
Assembly Required: No

1/12 scale, also referred to as one-inch scale (or 1" scale), means 1 inch = 1 foot

Be the first to submit a review on this product! is dedicated to bringing you quality items at the best prices, and we stand behind our products 100 percent. Satisfaction guaranteed. If, for any reason, you are not completely satisfied with your order from, simply return it to us within 30 days. We are more than happy to exchange it or provide you with a credit or refund.

Wood is unfinished, so paint as you wish. Check out the Dodson Miter-Rite (#41001) for precision cut...

To our knowledge, this is the smallest working outlet ever made, measuring a mere .414"H x .3"W x .1...

Made to work with CK1003 (HBS#721003) outlet. May be attached to the bulb wires from any lighting fi...

Build a wall like the one above! Handmade of high-density casting plaster. bag covers 45 square inch...

About UsContact UsInternational OrdersPrivacy PolicyQuick OrderReturnsShippingLinks
© 2015 Benamy International Inc. All rights reserved. • 2388 Pleasantdale Rd • Atlanta, GA 30340