Click image to enlarge

Closeout New!

Item #: H8210X
Reg. Price: $19.95
Our Price: $9.95

In Stock



We received a shipment of H8210 that is absolutely fine EXCEPT it has the wrong header. The sheet itself is absolutely fine! This extremely detailed 11” x 17” rubber-like sheet will add dimension to your miniature build. Although this latex herringbone brick-veneer sheet is technically 1/24 scale it can also work in many 1/12 scale scenes. It can be easily cut with scissors or a craft knife. Here are some suggested uses:
  • An outdoor patio or garden walkway
  • A hearth or fireplace interior
  • An 'Old World' kitchen floor
  • As accent panels in a chimney
  • In a Tudor-styled structure filling some panels on a beam & stucco exterior

New and Improved Installation Instructions for a Smooth, Wrinkle-Free Application Paint the entire back of the sheet with a coat of Gesso #55309. Use a brush that leaves marks; let dry. Apply Grandmother Stover’s Glue #172 (or similar adhesive) very thinly, using an old credit card or similar, to the surface where the sheet will go. Put the sheet in place, trying not to stretch or distort it in any way. Do not rub, but use pressure to assure good adhesion, especially in the center area. If it is on a surface that must remain vertical during installation, use masking tape to hold it in place while the glue dries completely (at least 24-48 hours). If the surface will be painted, prime with Gesso before using craft acrylics.

Scale: 1/24
Assembly Required: No
Item may vary slightly from the image shown

1/24 scale, also referred to as half-inch scale (or 1/2" scale), means 1/2 inch = 1 foot


Be the first to submit a review on this product!
Review and Rate this Item
I Agree
We use cookies to deliver the best possible experience on our website. To learn more, visit our Privacy Policy.