Click image to enlarge


Item #: H8210
Our Price: $19.95

12 units available


Add a new dimension to your miniature build with our Herringbone brick pattern sheets. Although these latex Herringbone brick veneer sheets are technically 1/24 scale, our incredibly talented staff miniaturist, Fran, highly recommends them for use in a variety of 1/12 scale scenes. "Because of the herringbone brick pattern and irregular shape and size of the bricks, it is almost better in 1/12 than 1/24."

Here are some suggested uses:
  • An outdoor patio or garden walkway
  • A hearth or fireplace interior
  • An 'Old World' kitchen floor
  • As accent panels in a chimney
  • In a Tudor-styled structure filling some panels on a beam & stucco exterior

The rubber-like composition of this faux stone, Herringbone brick sheet makes it easy to apply leaving no wrinkles or gaps. It is easily cut with scissors or a craft knife.

New and Improved Installation Instructions
Paint the entire back of the sheet with a coat of Gesso #55309. Use a brush that leaves marks; let dry. Apply Grandmother Stover’s Glue #172 (or similar adhesive) very thinly, using an old credit card or similar, to the surface where the sheet will go. Put the sheet in place, trying not to stretch or distort it in any way. Do not rub, but use pressure to assure good adhesion, especially in the center area. If it is on a surface that must remain vertical during installation, use masking tape to hold it in place while the glue dries completely (at least 24-48 hours). If the surface will be painted, prime with Gesso before using craft acrylics.

11" x 17"

Scale: 1/24
Assembly Required: No
Item may vary slightly from the image shown

1/24 scale, also referred to as half-inch scale (or 1/2" scale), means 1/2 inch = 1 foot


Average Rating:
(based on 2 reviews)

Showing 2 Reviews:

by Cherrie
on 2/13/2021
Best roofing material I could find!
When I saw this on sale, I got some to try for my balcony. After it arrived, I could see that not only was it Perfect for the balcony, but added a great finish to the flat roof portions of my house. (Shingles on the slopes portions of course). Easy to trim, fit, and install!!!
by Sharon
on 8/1/2020
This brick sheet is even better than I expected and perfect for an outdoor patio display, a brick wall in a coffee shop or a firehouse display or even a wall behind a fireplace in a home or den display. It can be cut to use in many different ways and is really versatile!
Review and Rate this Item

Other Items In This Category

I Agree
We use cookies to deliver the best possible experience on our website. To learn more, visit our Privacy Policy.